ABOUT
A workshop that runs on numbers
KOLDI 19 is an auto service where every decision is made from a measurement, not an assumption.
How we work
We started with one lift and one principle: never replace a part until you have proven it is the cause. The principle has not changed; the equipment around it keeps getting better.
Today we run a 3D laser alignment rig, a four-channel oscilloscope, and a multi-brand diagnostic interface with OEM protocol access. Every significant job ends with a report that you keep.
What that means for you
You get an explanation of why something was replaced, backed by the measured values before and after. If the measurement says the part is in tolerance, we do not replace it.
Principles
- 01
Measure before you intervene
Diagnostics end in data, not guesswork. Every recommendation rests on a measured value.
- 02
Transparent estimate
You see the labour and parts breakdown up front. No line items appear at the counter.
- 03
Documented result
The before/after report stays with you — including the values we actually achieved.
Equipment
| Alignment rig | 3D laser, ± 0.05° |
|---|---|
| Diagnostics | OBD-II + OEM protocols |
| Oscilloscope | 4 channels, CAN logging |
| Brake dyno | Roller, up to 3.5 t |
| A/C station | R134a / R1234yf |
| Wheel balancer | 13" – 22", ± 5 g |